WT01+WT02 UAV Detection & DJI RID Decoder Module Kit Supporting 8/16‑Antenna for Secondary Integration
WT01+WT02 UAV Detection & DJI RID Decoder Module Kit Supporting 8/16‑Antenna for Secondary Integration
Basic Properties
Country Of Origin
China
Brand Name
LDSK
Certificate
Guangdong, China
PRODUCT MODEL
LDK-WT01;LDK-WT02
Trading Properties
MOQ
1
Payment Method
D/A,D/P,T/T,Western Union,Paypal
Supply Capacity
50000 pcs per month
Product Summary
WT01+WT02 UAV Detection & DJI RID Decoder Module Kit for Secondary Integration Overview WT01+WT02 is embedded RF hardware set built for secondary development. WT01 completes wide‑band RF acquisition, drone signal identification, RSSI statistics, multi‑antenna amplitude‑comparison direction‑finding ...
Product Details
Highlight:
DJI RID Decoder Detection Module Kit
,8-Antenna UAV Detection Module Kit
,Secondary Integration UAV Detection Module Kit
Product Name:
UAV Detection & DJI RID Decoder Module
wt01 Frequency:
70MHz‑6GHz
wt01 Detect Range:
1‑10km (open‑air)
wt02 Max DJI Detect Distance:
2km
wt02 RID Decoding Range:
1‑3km
Operation Mode:
Passive RF Receiving, No Transmitting
Product Description
WT01+WT02 UAV Detection & DJI RID Decoder Module Kit for Secondary Integration
Overview
WT01+WT02 is embedded RF hardware set built for secondary development. WT01 completes wide‑band RF acquisition, drone signal identification, RSSI statistics, multi‑antenna amplitude‑comparison direction‑finding and raw FFT spectrum output via GPIO control. WT02 adopts 61.44M FPGA to process DJI Remote‑ID protocol. It outputs plain‑text location data for O3, and 176‑byte ciphertext for DJI O4 for server‑side decryption. All processing runs onboard; developers can embed the two modules into gateways, cabinets or custom surveillance platforms. Passive receiving design without RF emission.
Features
- Embedded dual‑module solution for secondary integration: signal scan, direction‑finding & DJI RID parsing
- WT01:70‑6000MHz bandwidth; detect multi‑protocol drones, support 8/16‑antenna DF with external RF switch, output raw 2048‑point FFT spectrum
- WT02 FPGA 61.44M sampling rate: local O3 RID decode, O4 ciphertext output, comply GB42590‑2023 & ASTM F3411‑22a
- Dual‑RX channel on WT01 to enhance low‑frequency receiving performance
- Multiple output interfaces:UDP / TCP network, 3.3V TTL serial port 115200 8N1
- Full AT‑command control: frequency band, gain, IP, antenna mask, heartbeat, scan mode
- Compact metal shield housing 89×55×18mm, DC5V 3.3W each module
- All computation onboard, no external host required; OEM & ODM available
Parameters
| Item | Specification |
|---|---|
| Model | WT01 + WT02 Development Kit |
| WT01 Frequency | 70MHz‑6GHz |
| WT01 Detect Range | 1‑10km (open‑air) |
| WT02 Max DJI Detect Distance | 2km |
| WT02 RID Decoding Range | 1‑3km |
| Sampling Rate(WT02) | 61.44M(FPGA) |
| Compliance | GB42590‑2023, ASTM F3411‑22a |
| Communication | UDP / TCP /3.3V‑TTL UART 115200,8N1 |
| Power Input | DC5V for each unit |
| Power Consumption | 3.3W per module；WT01‑2R2T mode +0.5W |
| Module Size | 89 × 55 ×18 mm each |
| Direction‑Finding Method | WT01 GPIO control external SP8T / SP16T RF switch |
| Spectrum Output(WT01) | 2048‑point binary FFT data |
| Operation Mode | Passive RF receiving, no transmitting |
Q1: Can WT01 and WT02 work independently?
A: Yes. WT01 can run alone for wide‑band drone detection, DF and spectrum analysis. WT02 works alone for DJI RID parsing, but cannot detect non‑DJI drone signals. Full‑function requires both modules.
Q2: Does hardware output final direction angle for direction‑finding?
A: No. WT01 outputs RSSI value and corresponding GPIO antenna index. You need upper software to calculate azimuth angle by comparing RSSI of each antenna channel. RF switch and antennas are not included.
Q3: What is difference between DJI O3 and O4 RID processing?
A: O3 RID is decoded locally inside WT02 and output GPS/serial in ASCII. DJI O4 outputs encrypted 176‑byte binary payload, decryption needs to call our server API. Hardware cannot decrypt O4 ciphertext itself.
Q4: What documents will you provide for integration?
A: We provide hardware spec sheet, full AT command reference, test sample log, data output format description.
